| |
|
|
bgp log-neighbor-changes
Enables the generation of logging messages generated when the status of a BGP neighbor changes.
Syntax: [no] bgp log-neighbor-changes
Description: The bgp log-neighbor-changes command in BGP configuration mode allows for the enabling/disabling of logging messages generated when the status of a BGP neighbor changes: resets, comes up, or goes down.
Use the bgp log-neighbor-changes command to enable logging message generation of BGP neighbor changes.
Use the no bgp log-neighbor-changes command to disable logging message generation of BGP neighbor changes.
Factory Default: Disabled.
Command Mode: Router Configuration.
Example: The following example enables logging of BGP neighbor changes for this router:
router(config)#router bgp 101
router(config-router)#bgp log-neighbor-changes
router(config-router)#end
router#
Related Commands: None.
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: BGP_Nd.fm
HTML File Name: BGP_Nd11.html
Last Updated: 05/10/04 at 16:36:55