| |
|
|
ip source-route
Enables and disables source routing for this bay.
Syntax: [no] ip source-route
Description: IPriori supports source routing as defined in RFC791. The IP header source route option allows the source IP host to set a packet's route through the IP network. With IP source routing enabled, packets containing the source route option are forwarded in accordance with the specified router addresses contained in the header. If the IP source route option is disabled on this router, IPriori discards all packets containing the IP source route option in its header.
Use the ip source-route command to enable source routing for this bay.
Use the no ip source-route to disable source routing for this bay.
Factory Default: Enabled.
Command Mode: Configuration.
Example 1: In the following example, the no ip source-route command disables source routing for this bay:
router#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)no ip source-route
Example 2: In the following example, the ip source-route command enables source routing for this bay:
router#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)ip source-route
Related Commands: ping
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: IP_Commands.fm
HTML File Name: IP_Commands10.html
Last Updated: 05/10/04 at 16:34:20