| |
|
|
ip flow-export destination
Configures the collector address to which Netflow packets are sent.
Syntax: [no] ip flow-export destination ip-address [udp-port] [version 5 {origin-as | peer-as}]
ip-address
Specifies the IP address of the collector to which Netflow packets are sent.
udp-port
UDP port to which Netflow packets are sent. Default: 2055.
Description: Configuration of a collector destination address specifies where Netflow packets are collected. The collector destination address is the IP address and UDP-port of the entity that collects the Netflow packets. Because there is not a default for this parameter, the collector destination address must be configured.
Use the ip flow-export destination command to configure the collector destination address. The Netflow version and the form of AS number the Netflow packet will use can also be specified by this command. AS number forms are Origin AS and Peer AS. Netflow version 5 is the supported version for this release.
The collector destination address can be configured both globally or per module. A module configuration over-rides a global configuration for the configured module.
Use the no ip flow-export destination command to set any collector destination addresses configured on modules to the global destination collector. Using this command at the global configuration command mode deletes the collector destination.
Factory Default: None.
Command Mode: Configuration for global affect and Module configuration for per module affect.
Example: In the following example, the flow cache is set globally to 131072 (128K). On module 1/2 the flow cache is set to the factory default using the no ip flow cache command:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#ip flow-export destination 71.5.1.199 2055
router#show ip flow-cache module 1/2 verbose IP Netflow Cache on Module 1/2
37200 active, 18259 on freelist, of 65536 configured
0 flow allocation failures, 8966 samples lost
Exporting flows to 71.5.1.199 (2055), using source 71.71.71.71
Version 5 records, no-as
1801 Netflow packets sent, 0 errors
Active flow timeout is 1 minutes, inactive is 15 seconds
Proto:Tos SrcIp:Port DstIp:Port Pkts Bytes Time(ms) TcpFlg Start Input
udp:00 31.164. 165.90:2000 31.1.2.5:2001 1 200 0 0x10 11:06:49.402 POS 1/6/1
udp:00 50.182.183.72:2000 50.3.3.4:2001 2 400 1475 0x10 11:06:47.212 POS 1/6/1
.
.
.
udp:00 75.183.184.71:2000 75.1.3.1:2001 1 200 0 0x10 11:06:49.324 POS 1/6/1
Related Commands: ip flow-cache active-timeout
ip flow-cache inactive-timeout
ip flow-export source
show ip flow-cache
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: Routing_Pol.fm
HTML File Name: Routing_Pol15.html
Last Updated: 05/10/04 at 16:38:37