| |
|
|
loopback-address-only
Limits information on the loopback interface to IP address and network information.
Syntax: [no] loopback-address-only
Description: When loopback-address-only is set, the Avici router only includes IP address and network information on the loopback interface, and omits it for all directly-connected interfaces.
Use the loopback-address-only command to configure the router to include only IP address and network information on the loopback interface.
Use the no loopback-address-only command to
Factory Default: Disabled.
Command Mode: Router configuration.
Example: In the following example:
- The the router isis command enables IS-IS on the router, specifies an IS-IS instance, and changes the command mode to Router configuration,
- The loopback-address-only command configures the router to include only IP address and network information for the loopback interface,
- The show running-config isis command displays the setting:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#router isis npi
router(config-router)#loopback-address-only
router(config-router)#end
router#show run isis
!
router isis npi
net 47.1000.5000.0001.00
is-type level-1
log-adjacency-changes
loopback-address-only
.
.
.
Related Commands: None
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: ISIS.fm
HTML File Name: ISIS24.html
Last Updated: 05/10/04 at 16:35:45