show ip ospf border-routers

---

Displays the internal OSPF routing table entries to border routers.

Syntax: show ip ospf border-routers

Description: Displays the internal OSPF routing table entries to an Area Border Route (ABR) and Autonomous System Boundary Router (ASBR).

Factory Default: None

Command Mode: Executive and privileged.

Example: The following is sample output of the show ip ospf border-routers command:

router#show ip ospf border-routers Codes: i - Intra-area route, I-Inter-area route Type Dest Address Cost NextHop Interface ABR ASBR Area SPF i 23.2.2.2 10 192.1.1.199 Ethernet 2 TRUE FALSE 0 3 i 25.2.2.2 10 192.1.1.200 Ethernet 2 TRUE FALSE 0 3

The following table describes the fields shown in the show ip ospf border-routers command:

Table 2-2. Fields Displayed by show ip ospf border-routers 

Field	Description
Type	i - intra-area route I - inter-area route
Dest Address	Destination's router ID.
Cost	Cost of using this route.
Next Hop	IP address of the next hop toward the destination.
Interface	The connection interface.
ABR	Indicates if the destination router is a Area Border Router (ABR).
ASBR	Indicates if the destination router is a Area Autonomous System Boundary Router (ASBR).
Area	ID of the area from which this route was learned.
SPF	The internal number of SPF calculation that installed this route.

Related Commands: area authentication
area stub
network area
ospf router-id
router ospf
show ip ospf
show ip ospf database
show ip ospf interface
show ip ospf neighbor
show ip ospf request-list
show ip ospf retransmission-list
show ospf virtual-links

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: ospf.fm
    HTML File Name: ospf24.html
    Last Updated: 05/10/04 at 16:34:58

Please email suggestions and comments to: doc@avici.com